Cracks in Houses: How Does a Surveyor Decide If Cracking Is Serious in London and the Home Counties?

Cracks in Houses: How Does a Surveyor Decide If Cracking Is Serious in London and the Home Counties?

Cracks in Houses: How Does a Surveyor Decide If Cracking Is Serious in London and the Home Counties?

Cracks in a house can be concerning, but they do not always indicate a serious structural problem. In this article, Lexington Surveyors explains how surveyors assess cracking in properties across London and the Home Counties, what signs to look out for and when specialist investigation may be required.

Category

Category

Residential

Residential

Residential

Year

Year

2026

2026

2026

Time of Read

Time of Read

10 Minutes

10 Minutes

10 Minutes

Balham SW property

How surveyors assess cracks in residential properties, including the warning signs of structural movement, possible causes of subsidence and when further investigation may be necessary.

Cracks are one of the most common concerns we encounter when carrying out residential surveys across London and the Home Counties.

For a homebuyer, discovering cracks in a property can understandably be concerning. However, cracking does not automatically mean subsidence or a serious structural problem.

Buildings move for many reasons. Minor cracking can result from drying shrinkage, thermal movement, historic settlement, alterations and differences between building materials. At the other end of the scale, certain patterns of cracking can indicate more significant structural or foundation movement.

So, how does a residential surveyor decide whether cracking is likely to be serious?

There is no single test. A surveyor considers the width, shape, direction, location and distribution of the cracking, together with the construction and age of the property, signs of distortion elsewhere and possible contributing factors such as ground conditions, foundation depth, trees and drainage.

The objective is not simply to measure a crack. It is to understand how the building appears to have moved, why it may have moved and whether there is evidence that movement could still be occurring.

Why Is Structural Cracking Particularly Relevant in London and the Home Counties?

Ground conditions vary significantly across London and the surrounding Home Counties. However, large areas of London and the South East contain shrinkable clay soils, including London Clay.

Clay soils change volume as their moisture content changes. During prolonged periods of dry weather, clay can lose moisture and shrink. Where this occurs beneath foundations, particularly unevenly, part of the building can move downwards.

This is one mechanism by which subsidence can occur.

Older properties can also be more susceptible to changes within the near-surface ground because Victorian, Edwardian and early 20th-century houses may have considerably shallower foundations than modern buildings.

This does not mean that an old house built on clay will suffer from subsidence. London contains an enormous stock of older buildings that have performed perfectly satisfactorily for generations.

It does mean that soil conditions, foundation construction and the surrounding environment are important considerations when potentially significant cracking is identified.

Crack Width and BRE Digest 251

A useful starting point when assessing cracking is BRE Digest 251 – Assessment of Damage in Low-Rise Buildings.

BRE Digest 251 provides a widely recognised framework for classifying visible cracking and associated building damage.

Broadly, the categories range from:

  • Category 0 – Negligible: Hairline cracking of less than approximately 0.1mm.

  • Category 1 – Very slight: Fine cracks up to approximately 1mm, generally capable of being addressed during normal decoration.

  • Category 2 – Slight: Cracks typically up to approximately 5mm. Filling, localised repointing and minor adjustment to doors and windows may be required.

  • Category 3 – Moderate: Typically cracks between approximately 5mm and 15mm, although the number and distribution of cracks are also relevant. Masonry repairs may be necessary and doors or windows may stick.

  • Category 4 – Severe: Typically cracks between approximately 15mm and 25mm. More substantial repairs, potentially including breaking out and replacing sections of masonry, may be required.

  • Category 5 – Very severe: Typically cracks exceeding approximately 25mm, potentially accompanied by significant distortion and requiring major structural repair.

However, crack width should never be considered in isolation.

BRE damage categories are useful for describing the severity of damage and the likely extent of repair. They do not, on their own, diagnose subsidence.

A relatively narrow crack showing evidence of recent progressive movement could potentially be more important than a wider crack which occurred many decades ago and has remained stable ever since.

The surveyor therefore needs to consider the crack as one piece of a much larger puzzle.

What Does the Shape of a Crack Tell a Surveyor?

The shape and geometry of a crack can provide important clues about the type and direction of movement that may have occurred.

A surveyor will consider whether the crack is:

  • Vertical

  • Horizontal

  • Diagonal

  • Stepped through the masonry

  • Relatively uniform in width

  • Tapering and becoming wider towards one end

Of particular interest is cracking that becomes progressively wider with height.

This can be consistent with differential foundation movement, including subsidence, where part of the building has moved downwards and is effectively pulling or rotating away from the adjoining structure.

As the affected section moves, separation can become greater towards the top of the wall, resulting in a crack that is noticeably wider at high level than at its base.

The opposite pattern can also provide useful evidence. A crack which becomes wider towards its base may indicate a different direction or mechanism of movement.

For this reason, a surveyor should not simply record the maximum width. The change in width, direction of the crack and apparent direction of movement can be equally important.

For example, a stepped crack measuring approximately 1mm at low level but increasing to 5mm at high level may warrant greater attention than a relatively uniform crack of a similar maximum width.

Crack geometry does not establish the cause by itself. However, understanding which part of the building appears to have moved and in which direction is an important part of determining whether cracking may be associated with subsidence or another form of structural movement.

Stepped Cracking Through Brickwork

Stepped cracking is often encountered in traditional masonry buildings.

Rather than travelling in a perfectly straight line, a crack may follow the horizontal and vertical mortar joints between bricks, creating a staircase-like pattern.

This can be associated with differential movement within a masonry wall.

The surveyor will also consider whether the cracking remains predominantly within the mortar joints or whether it passes directly through the bricks or blocks themselves.

Cracking through masonry units can indicate that relatively significant forces have been transferred through the wall, although this needs to be interpreted alongside the age, strength and condition of the masonry.

By contrast, isolated cracking through deteriorated mortar may simply relate to weathering, poor previous pointing or localised deterioration.

The distinction can therefore be useful when trying to understand what has happened to the wall.

Is the Cracking Visible Inside and Outside?

Another useful technique is to compare corresponding areas internally and externally.

If a significant diagonal crack is identified externally, the surveyor may inspect the equivalent position inside the property.

Where corresponding cracking is visible in the same position both internally and externally, this can provide stronger evidence that movement is affecting the wall itself rather than simply an internal plaster finish or external render.

Conversely, fine cracking confined to internal plaster or plasterboard joints, with no corresponding external cracking or distortion, may be considerably less significant.

The construction of the wall must also be considered. Cracking through finishes does not necessarily replicate the precise condition of the masonry concealed behind them.

Cracking Around Windows and Doors

Windows and doors interrupt the continuity of masonry and create locations where structural movement can become particularly visible.

A surveyor may look for:

  • Diagonal cracks extending from the corners of openings

  • Cracks beneath window sills

  • Movement around lintels

  • Separation between frames and surrounding masonry

  • Doors or windows which have become difficult to operate

  • Openings which appear out of square

  • Distortion of the surrounding brickwork

Cracking around an opening does not automatically mean foundation movement has occurred.

A failed or inadequate lintel, for example, can cause localised cracking above a window or door and may initially appear similar to movement-related damage.

Again, the wider pattern of evidence is important.

Looking for Distortion Elsewhere in the Building

Potentially significant movement often leaves more than one clue.

A surveyor will therefore look beyond the crack itself for evidence such as:

  • Sloping or distorted floors

  • Leaning or bulging walls

  • Gaps around door and window frames

  • Distorted openings

  • Separation between an extension and the original building

  • Distortion to roof lines

  • Sticking doors and windows

  • Displaced masonry

  • Recurrent cracking through previous repairs

The more pieces of evidence that point towards the same movement mechanism, the stronger the justification for further investigation.

Has the Crack Been Repaired Before?

Previous repairs can provide valuable information.

A surveyor may identify filler, localised repointing, mesh reinforcement, different-coloured mortar or recent decoration around an area of cracking.

Where a crack has subsequently reopened through a previous repair, this demonstrates that movement has taken place since that repair was completed.

However, it does not necessarily establish that movement remains active at the date of the survey.

Understanding when the crack first appeared, when it was repaired and whether it has changed subsequently can therefore be extremely useful.

The seller should, where appropriate, be asked about the history of the cracking and whether there have been previous structural investigations, monitoring, repairs or insurance claims.

What Can Cause Subsidence and Structural Movement?

Identifying cracking is only part of the assessment.

The next question is: why has the building moved?

There are numerous possible causes and contributing factors.

Shrinkable Clay Soil

Shrinkable clay is particularly relevant across London and parts of the Home Counties.

Clay absorbs moisture and increases in volume when wet and loses moisture and contracts when dry.

During prolonged hot and dry conditions, the moisture content of clay can reduce sufficiently for the ground to shrink.

Where this occurs unevenly beneath a building, part of the foundations can move downwards relative to the rest of the property.

Prolonged Hot and Dry Weather

Weather conditions can therefore be relevant when assessing recently developed cracking.

Following a particularly hot or dry spring and summer, a surveyor may give greater consideration to the potential for clay shrinkage where the local geology is susceptible.

This becomes more relevant where several factors occur together, such as shrinkable clay, relatively shallow foundations and mature vegetation close to the property.

However, a dry summer is a potential contributing factor rather than evidence of subsidence by itself.

Trees and Large Vegetation

Trees can extract substantial quantities of moisture from the ground.

Where mature trees are growing close to foundations on shrinkable clay, this can contribute to soil desiccation and potentially foundation movement.

A surveyor may therefore consider:

  • The approximate species of the tree, where reasonably identifiable

  • Its height and maturity

  • Its distance from the building

  • The likely extent of its root system

  • Local soil conditions

  • Whether the location and direction of cracking correspond with the position of the vegetation

The presence of a tree near a building does not mean that it is responsible for structural movement.

Equally, removing a mature tree should not automatically be treated as the solution. Significant changes to vegetation on shrinkable clay can alter the moisture balance of the soil and, in some circumstances, contribute to ground heave.

Where trees may be implicated in structural movement, specialist structural and arboricultural advice may therefore be necessary.

Foundation Depth

Foundation depth is another important consideration.

Many older properties across London and the Home Counties were constructed with foundations that are relatively shallow compared with modern construction.

Shallow foundations can be more exposed to seasonal changes in the upper layers of the soil and the influence of nearby vegetation.

Extensions can create another potential area of differential movement.

For example, a Victorian house and a modern rear extension may have been constructed more than a century apart using very different foundation depths and construction techniques.

Some cracking at the junction between old and new structures may therefore result from differential movement.

The surveyor needs to assess whether the extent and pattern appear consistent with relatively minor historic movement or whether further investigation is justified.

Leaking Drains and Poor Rainwater Management

Structural movement is not only associated with dry ground.

Excess water can also affect the ground supporting a building.

Leaking underground drains, damaged water services, overflowing gutters, defective rainwater pipes and poorly positioned gullies can introduce significant amounts of water close to foundations.

Depending on the ground conditions, this may soften supporting soils or potentially wash finer material from granular soils.

When assessing cracking, a surveyor may therefore consider:

  • The condition of gutters

  • Rainwater pipes

  • Gullies

  • Inspection chambers

  • Nearby drainage runs

  • Visible leakage

  • Areas of persistent saturation

  • External ground levels and falls

  • Whether rainwater is being discharged immediately adjacent to the building

Where drainage is suspected as a possible contributing factor, further investigation such as a CCTV drainage survey and leakage testing may be appropriate.

Other Causes of Cracking

Not all cracking is caused by subsidence.

Other potential causes include:

  • Normal settlement

  • Drying shrinkage

  • Thermal expansion and contraction

  • Failed or inadequate lintels

  • Roof spread

  • Alterations to load-bearing walls

  • Inadequate support following chimney breast removal

  • Differential movement between different materials

  • Poorly bonded extensions

  • Corrosion of embedded steelwork

  • Cavity wall tie deterioration

  • Structural overloading

  • Deterioration or failure of individual building components

A good survey therefore avoids jumping immediately from "there is a crack" to "the property has subsidence."

The pattern and surrounding evidence need to support that conclusion.

Is the Movement Historic or Progressive?

This is often the most important question.

A residential survey provides a snapshot of the building at a particular point in time.

A surveyor may be able to identify clear evidence that structural movement has occurred but still be unable to establish from one inspection whether that movement:

  • Happened many years ago and has stabilised

  • Varies seasonally

  • Is actively and progressively worsening

Where potentially significant movement is identified but its status cannot be established from a single inspection, further investigation should normally take place before substantial repairs are undertaken.

What Happens Next If Potentially Serious Structural Cracking Is Found?

Where the pattern, extent or severity of cracking suggests potentially significant structural or foundation movement, further assessment by a suitably experienced Chartered Structural Engineer will often be recommended.

The purpose of the investigation is first to establish the likely cause and whether movement remains active.

Simply filling or repairing the cracks before understanding why they occurred can conceal useful evidence while leaving the underlying problem unresolved.

Depending on the circumstances, the structural engineer may recommend one or more of the following investigations.

Crack Monitoring

Where it is unclear whether movement is historic or ongoing, crack monitoring may be appropriate.

Crack monitors can be installed across selected cracks and measurements taken periodically to establish whether the cracks continue to open, close or otherwise move.

Monitoring may need to continue for several months and, in some cases, 12 months or longer to account for seasonal variations.

This can be particularly important where clay soils and vegetation are involved because ground moisture levels can change considerably throughout the year.

Monitoring can help distinguish between historic stable movement, seasonal movement and potentially progressive movement.

Trial Pits to Establish Foundation Depth

A structural engineer may recommend excavating trial pits adjacent to the foundations.

These can help establish:

  • The actual depth of the foundations

  • Foundation construction

  • The condition of the foundation

  • The nature of the ground immediately beneath it

  • Potentially the presence of nearby roots

This can be particularly valuable when investigating Victorian and Edwardian houses where original structural drawings are unlikely to be available.

Understanding the local geology is useful, but establishing how deep the foundations actually extend and what they are bearing onto can provide much more specific information about the individual property.

Boreholes and Soil Investigation

More detailed ground investigation may include boreholes and soil sampling.

This can help establish the composition and characteristics of the ground beneath or around the building.

Where clay is present, laboratory testing can assist in assessing its shrinkage characteristics. Investigations may also identify root activity and variations in soil moisture.

The results can then be considered alongside the crack pattern, foundation depth, drainage, vegetation and history of the building.

Drainage Investigations

If leaking drainage is suspected, the engineer may recommend further investigation including:

  • CCTV drainage surveys

  • Leakage or pressure testing

  • Inspection of underground drainage runs

  • Excavation where defects are identified

Where defective drainage is contributing to ground movement, repairing the drainage may form an important part of addressing the underlying cause.

Tree and Arboricultural Investigation

Where mature vegetation is potentially contributing to movement, specialist arboricultural advice may also be required.

The objective should not simply be to identify the nearest tree and remove it.

The relationship between the tree, soil, foundations and building needs to be understood before significant works are undertaken.

How Can Structural Cracking Be Repaired?

The correct repair depends on the cause, severity and whether the movement has stabilised.

Once the cause has been appropriately investigated and any ongoing movement addressed, the structural engineer can specify suitable repairs.

These can range from relatively minor masonry repairs through to substantial foundation works.

Repointing and Local Masonry Repairs

Where movement is historic and stable and damage is relatively minor, repairs may be straightforward.

Cracked mortar joints can potentially be raked out and repointed, damaged bricks or blocks replaced and internal finishes repaired and redecorated.

Helical Bar Crack Stitching

For some masonry cracks, the structural engineer may specify helical bar crack stitching.

This generally involves cutting slots into selected mortar joints across the crack and installing stainless-steel helical reinforcement within a suitable grout.

The reinforcement helps restore continuity and distribute loads across the cracked area of masonry.

However, crack stitching should not simply be used to hold together masonry that is still actively moving.

The underlying cause of the movement needs to be understood and, where necessary, addressed first.

Otherwise, further cracking may develop in the repaired area or elsewhere in the structure.

Localised Rebuilding

Where masonry has become substantially cracked, displaced or inadequately bonded, sections of the wall may need to be carefully dismantled and rebuilt.

The extent of rebuilding should be determined following structural assessment.

Underpinning

In more serious cases, strengthening or extending the foundations may be necessary.

Underpinning is a method of strengthening an existing foundation or transferring the building load to more suitable supporting ground.

There are different methods of underpinning and foundation stabilisation, and the appropriate solution will depend on the structure, ground conditions and cause of movement.

Importantly, underpinning is not automatically required simply because subsidence has occurred.

In many cases, addressing the underlying cause and allowing the building to stabilise may be sufficient before repairs are undertaken.

Underpinning is generally considered where investigation demonstrates that foundation strengthening is actually necessary and should be properly designed and specified by a suitably qualified structural engineer.

What Size Crack Should You Worry About?

There is no single crack width at which a property automatically has a serious structural problem.

Crack width is only one part of the assessment.

For example, consider a Victorian house in London with:

A diagonal stepped crack passing through masonry, measuring 1mm at low level but widening to 6mm at high level, visible internally and externally, reopening through previous repairs and accompanied by distortion to a nearby window, with a mature tree nearby and shrinkable clay beneath the property.

The widening of the crack towards high level may indicate that part of the building has moved downwards and is pulling or rotating away from the adjoining structure.

Taken together, these observations would normally justify considerably more investigation than an isolated 2mm crack to internal plaster with no corresponding external damage or distortion.

The surveyor is therefore assessing the pattern of evidence, rather than simply measuring the widest point of a crack.

Should You Buy a House With Cracks?

Cracking does not necessarily mean that you should avoid buying a property.

London and the Home Counties contain a huge stock of Victorian, Edwardian and other traditionally constructed buildings, and some degree of historic movement and cracking is common.

The important questions are:

  • What is likely to have caused the cracking?

  • Does the pattern indicate structural or foundation movement?

  • Is that movement historic, seasonal or progressive?

  • Does the underlying cause require further investigation or remediation?

  • What repairs may subsequently be required?

  • Could there be implications for buildings insurance, mortgage lending or future resale?

A residential building survey can identify visible evidence of movement and help determine whether cracking appears relatively minor or whether specialist investigation should take place before you commit to the purchase.

Where potentially significant structural movement is identified, assessment by a Chartered Structural Engineer may be recommended. Depending on the circumstances, this can lead to crack monitoring, trial pits, boreholes and soil investigation, drainage testing or arboricultural assessment before an appropriate repair strategy is determined.

Building Surveys for Cracking and Structural Movement in London and the Home Counties

At Lexington Surveyors, we carry out RICS residential surveys across London and the Home Counties, including Level 2 and Level 3 Home Surveys.

When cracking is identified, it should not be considered simply by measuring its width. The surveyor should assess the pattern, direction and distribution of the cracking, whether it passes through the masonry, whether it is widening towards one end, whether corresponding movement is visible elsewhere and what factors around the property could have contributed to it.

For older, altered or visibly cracked properties, a detailed survey before exchange can help identify potential structural concerns, establish where further specialist investigation is appropriate and give you a better understanding of the risks before committing to the purchase.

Share

Similar Posts

Cracks in a house can be concerning, but they do not always indicate a serious structural problem?

Cracks in a house can be concerning, but they do not always indicate a serious structural problem?

Cracks in a house can be concerning, but they do not always indicate a serious structural problem?

Ben Jackman

Ben Jackman

5 Minutes

5 Minutes

Cavity Wall Insulation & Damp Problems in Berkshire and Buckinghamshire: What Homeowners Need to Know

Cavity Wall Insulation & Damp Problems in Berkshire and Buckinghamshire: What Homeowners Need to Know

Cavity Wall Insulation & Damp Problems in Berkshire and Buckinghamshire: What Homeowners Need to Know

Jack Newport

Jack Newport

8 Minutes

8 Minutes

Solid Wall Damp Problems in London: Why Non-Breathable Finishes Cause Issues in Period Properties

Solid Wall Damp Problems in London: Why Non-Breathable Finishes Cause Issues in Period Properties

Solid Wall Damp Problems in London: Why Non-Breathable Finishes Cause Issues in Period Properties

Jack Newport

Jack Newport

6 Minutes

6 Minutes

Energy Efficiency in London Houses

Energy Efficiency in Homes: What Surveyors Check in London and the Home Counties

Energy Efficiency in Homes: What Surveyors Check in London and the Home Counties

Energy Efficiency in Homes: What Surveyors Check in London and the Home Counties

Ben Jackman

Ben Jackman

6 Minutes

6 Minutes

Victorian Homes

Victorian & Edwardian Homes in London: Common Defects to Look Out For

Victorian & Edwardian Homes in London: Common Defects to Look Out For

Victorian & Edwardian Homes in London: Common Defects to Look Out For

Jack Newport

Jack Newport

10 Minutes

10 Minutes

London Roof Structures

Typical London Roof Structures and Common Defects

Typical London Roof Structures and Common Defects

Typical London Roof Structures and Common Defects

Jack Newport

Jack Newport

4 min read

4 min read

Address Damps

Understanding and Addressing Rising Damp in Properties

Understanding and Addressing Rising Damp in Properties

Understanding and Addressing Rising Damp in Properties

Jack Newport

Jack Newport

4 min read

4 min read

RICS Property Surveys

The Crucial Role of RICS Surveys in Property Purchases

The Crucial Role of RICS Surveys in Property Purchases

The Crucial Role of RICS Surveys in Property Purchases

Jack Newport

Jack Newport

4 min read

4 min read

Comments